|
Detail produk:
|
| Bahan: | A333Gr1, Gr3, Gr4, Gr6, Gr7,09Mn2VDG ... | Standar: | A333 / SA333 ， GB / T18984-2003 |
|---|---|---|---|
| Tipe: | Mulus | OD: | 8mm ~ 1200mm |
| Ketebalan dinding: | 0.8mm ~ 200mm Peralatan kriogenik | Aplikasi: | Peralatan kriogenik |
| Perlakuan permukaan: | Varnish, Oil-dip, Pasifasiasi, Fosfat, Shot Blasting | Status pengiriman: | Anil, dinormalisasi, dinormalisasi + Tempered, dll |
| Cahaya Tinggi: | baja karbon tabung mulus,pipa baja karbon dilas |
||
A333 Gr6 Tabung Industri Baja Karbon Seamless Untuk Suhu Rendah Tekanan Kapal dan Penukar Panas Pipa 141.3 * 15.88mm
Standar Produk: GB / T18984-2003, ASTM A333, ASME SA333
Nilai baja utama: 16MnDG, 10MnDG, 09DG, 09Mn2VDG, 06Ni3MoDG, ASTM A333Gr1, A333Gr3, A333Gr4, A333Gr6, A333Gr7, A333G8, A333Gr9, A333Gr9, A333R
Aplikasi: untuk pipa bejana tekanan suhu rendah -45 ° C ~ -195 ° C dan pipa penukar panas suhu rendah.
Persyaratan Kimia & Sifat Mekanik:
| Standar | GB / T18984-2003 | ||||||||||
| Komponen Kimia (%) | |||||||||||
| Kelas | C | Si | M N | P | S | Cr | Ni | Cu | Mo | V | Al |
| 16MnDG | 0,12-0,20 | 0,20-0,55 | 1.20-1.60 | ≤0.025 | ≤0.025 | - | - | - | - | - | - |
| 10MnDG | ≤0,13 | 0,17-0,37 | ≤1.35 | ≤0.025 | ≤0.025 | - | - | - | - | ≤0,07 | - |
| 09DG | ≤0,12 | 0,17-0,37 | ≤0,95 | ≤0.025 | ≤0.025 | - | - | - | - | ≤0,07 | - |
| 09Mn2VDG | ≤0,12 | 0,17-0,37 | ≤1.85 | ≤0.025 | ≤0.025 | - | - | - | - | ≤0,12 | - |
| 06Ni3MoDG | ≤0,08 | 0,17-0,37 | ≤0.85 | ≤0.025 | ≤0.025 | - | 2.5-3.7 | - | 0,15-0,30 | ≤0,05 | - |
| ASTM A333 | A333Gr1 | ≤0,30 | - | 0,40-1,06 | ≤0.025 | ≤0.025 | - | - | - | - | - |
| A333Gr3 | ≤0,19 | 0,18-0,37 | 0,31-0,64 | ≤0.025 | ≤0.025 | - | 3.18-3.82 | - | - | - | - |
| A333Gr4 | ≤0,12 | 0,18-0,37 | 0,50-1,05 | ≤0.025 | ≤0.025 | 0,44-1,01 | 0,47-0,98 | 0,40-0,75 | - | - | 0,04-0,30 |
| A333Gr6 | ≤0,30 | ≥0,10 | 0,29-1,06 | ≤0.025 | ≤0.025 | - | - | - | - | - | - |
| A333Gr7 | ≤0,19 | 0,13-0,32 | ≤0,90 | ≤0.025 | ≤0.025 | - | 2.03-2.57 | - | - | - | - |
| A333Gr8 | ≤0,13 | 0,13-0,32 | ≤0,90 | ≤0.025 | ≤0.025 | - | 8.40-9.60 | - | - | - | - |
| A333Gr9 | ≤0.20 | - | 0,40-1,06 | ≤0.025 | ≤0.025 | - | 1.60-2.24 | 0,75-1,25 | - | - | - |
| A333Gr10 | ≤0.20 | 0,10-0,35 | 1.15-1.50 | ≤0.030 | ≤0.015 | ≤0,15 | ≤0,25 | ≤0.015 | ≤0,50 | ≤0,12 | ≤0,06 |
| A333Gr11 | ≤0.10 | ≤0.035 | ≤0.60 | ≤0.025 | ≤0.025 | ≤0,50 | 35.0-37.0 | - | ≤0,50 | - | - |
| Standar | Kelas | TS (Mpa) | YS (Mpa) | Pemanjangan(%) | |
| vertikal | horisontal | ||||
GB / T1898 -2003 | 16MnDG | 490-665 | ≥325 | ≥30 | - |
| 10MnDG | ≥400 | ≥240 | ≥35 | - | |
| 09DG | ≥385 | ≥210 | ≥35 | - | |
| 09Mn2VDG | ≥450 | ≥300 | ≥30 | - | |
| 06Ni3MoDG | ≥455 | ≥250 | ≥30 | - | |
| ASTM A333 | A333Gr1 | ≥380 | ≥205 | ≥35 | ≥25 |
| A333Gr3 | ≥450 | ≥240 | ≥30 | ≥20 | |
| A333Gr4 | ≥415 | ≥240 | ≥30 | ≥16.5 | |
| A333Gr6 | ≥415 | ≥240 | ≥30 | ≥16.5 | |
| A333Gr7 | ≥450 | ≥240 | ≥30 | ≥22 | |
| A333Gr8 | ≥690 | ≥515 | ≥22 | - | |
| A333Gr9 | ≥435 | ≥315 | ≥28 | - | |
| A333Gr10 | ≥550 | ≥450 | ≥22 | - | |
| A333Gr11 | ≥450 | ≥240 | ≥18 | - |
Tandai: Sebagaimana diminta.
Inspeksi dan Uji: uji komposisi kimia, uji sifat mekanik (tarik, hasil, perpanjangan), uji sifat proses (flatting, flaring, bending, hardness, impact, dll.), Uji penampilan dan ukuran, uji inspeksi non-destruktif, uji hidrostastik .
Status pengiriman: Anil, dinormalisasi, dinormalisasi + Marah, dll.
Pengobatan permukaan: impregnasi minyak, cat, pasif, fosfat, peledakan tembakan dll.
Packing: Paket ekspor / kotak kayu / sebagai persyaratan.
Kontak Person: Mrs. Yana Dong
Tel: 13661003712, 86-10-5712 1108, 5718 5998
Faks: 86-10-56752778
